14

SPeCIFICATIONS

HDO4022

HDO4024

HDO4032

HDO4034

HDO4054

HDO4104

Vertical

Bandwidth (@ 50

Ω)

200 MHz

350 MHz

500 MHz

1 GHz

Rise time

1.75 ns typical

1 ns typical

700 ps typical

450 ps typical

Input Channels

2

4

2

4

4

4

Vertical Resolution

12-bits; up to 15-bits with enhanced resolution (ERES)

Sensitivity

50

Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div

DC Gain Accuracy

±(0.5%) Full Scale, offset at 0 V

BW Limit

20 MHz, 200 MHz

Maximum Input Voltage

50

Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)

Input Coupling

50

Ω: DC, GND; 1 MΩ: AC, DC, GND

Input Impedance

50

Ω ±2.0%, 1 MΩ ±2.0% || 15 pF

Offset Range

50

Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 1 V: ±10 V

1 M

Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 100 mV: ±16 V,

102 mV - 198 mV: ±80V, 200 mV - 1 V: ±160 V, 1.02 V -10 V: ±400 V

Offset Accuracy

±(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1 mV)

Acquisition

Sample Rate (Single-shot)

2.5 GS/s

Sample Rate (Repetitive)

125 GS/s

Record Length

Standard -STD: 12.5 Mpts/ch (all channels) 25 Mpts (interleaved)

Optional -L:

25 Mpts/ch (all channels), 50 Mpts (interleaved)

Acquisition Modes

Real Time, Roll, RIS (Random Interleaved Sampling),

Sequence (Segmented Memory up to 10,000 segments with 1μs intersegment time)

Timebase Range

20 ps/div–10000 s/div; RIS available at

≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s

Timebase Accuracy

±2.5 ppm for 5 to 40C + 1.0 ppm/year from calibration

Trigger System

Modes

Auto, Normal, Single, Stop

Sources

Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)

Coupling

DC, AC, HFREJ, LFREJ

Pre-trigger Delay

0-100% of full scale

Post-trigger Delay

0-10,000 Divisions

Hold-off

2ns up to 20s or 1 to 1,000,000,000 events

Internal Trigger Level Range

±4.1 Divisions

External Trigger Level Range

Ext: ±400mV, Ext/10: ±4V

Trigger Types

Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,

Interval (signal or Pattern), Dropout, Qualified (State or Edge)

Measure, zoom and Math Tools

Measurement Parameters

Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low),

Delay, Delta Period @ Level, Delta Time @ Level, Duty, Duty @ Level, Edge @ Level, Fall Time (90%–10%),

Fall Time (80%–20%), Frequency, Frequency @ level, Maximum, Mean, Minimum, Overshoot+, Overshoot-,

Peak-Peak, Period, Period @ Level, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew,

Standard Deviation, Time @ Level, Top (High), Width+, Width-. Statistics and Histicons can be added to any

measurement and all measurements can be gated.

Zooming

Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.

Math Functions

Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative,

Envelope, Enhanced Resolution (to 15-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof,

Square, Square Root, Trend, Zoom and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and

FlatTop windows). 2 dual operator math functions may be defined at a time.