 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
MAS6180C 数据表(PDF) 3 Page - Micro Analog systems |
|
|
|||||||||||||||||||||||||||||
MAS6180C 数据表(HTML) 3 Page - Micro Analog systems |
|
|
3 / 13 page  3 (13) DA6180C.000 26 November, 2010 6) ABSOLUTE MAXIMUM RATINGS All Voltages with Respect to Ground Parameter Symbol Conditions Min Max Unit Supply Voltage VDD-VSS - 0.3 +5.5 V Input Voltage VIN VSS-0.3 VDD+0.3 V ESD Rating VESD For all pins, Human Body Model (HBM) ±2 kV Latchup Current Limit ILUT For all pins ±100 mA Operating Temperature TOP -40 +85 °C Storage Temperature TST - 55 +150 °C Stresses beyond those listed may cause permanent damage to the device. The device may not operate under these conditions, but it will not be destroyed. Note: In latchup testing the supply voltages are connected normally to the tested device. Then pulsed test current is fed to each input separately and device current consumption is observed. If the device current consumption increases suddenly due to test current pulses and the abnormally high current consumption continues after test current pulses are cut off then the device has gone to latch up. Current pulse is turned on for 10 ms and off for 20 ms. ELECTRICAL CHARACTERISTICS Operating Conditions: VDD = 5.0V, Temperature = 25°C, unless otherwise specified. Parameter Symbol Conditions Min Typ Max Unit Operating Voltage VDD TA = -40°C..+85°C 1.5 5.0 5.5 V VDD=1.5 V, Vin=0.4 µVrms VDD=5 V, Vin=0.4 µVrms 66 68 80 µ A Current Consumption IDD VDD=1.5 V, Vin=20 mVrms VDD=5 V, Vin=20 mVrms 43 45 65 µ A Stand-By Current IDDoff See note below. 0.1 µ A Input Frequency Range fIN 40 100 kHz Minimum Input Voltage VIN min 0.4 1 µ Vrms Maximum Input Voltage VIN max 20 mVrms Receiver Input Resistance Receiver Input Capacitance RRFI CRFI Differential Input, f=77.5 kHz 600 1.1 kΩ pF Input Levels |lIN|<0.5 µA VIL VIH VDD-0.35 0.35 V Output Current VOL<0.2 VDD;VOH >0.8 VDD |IOUT| 5 15 µ A DCF77 Output Pulses T 100ms T 200ms 1 µVrms ≤ VIN ≤ 20 mVrms, see note below! 95 195 ms MSF Output Pulses T 100ms T 200ms T 500ms 1 µVrms ≤ VIN ≤ 20 mVrms, see note below! 120 220 520 ms WWVB Output Pulses T 200ms T 500ms T 800ms 1 µVrms ≤ VIN ≤ 20 mVrms, see note below! 200 500 800 ms JJY60 Output Pulses T 200ms T 500ms T 800ms 1 µVrms ≤ VIN ≤ 20 mVrms, see note below! 210 505 800 ms JJY40 Output Pulses T 200ms T 500ms T 800ms 1 µVrms ≤ VIN ≤ 20 mVrms, see note below! 200 495 790 ms Startup Time TStart Fast Start-up, Vin=0.4 µVrms Fast Start-up, Vin=20 mVrms 1.3 3.5 4 s Output Delay Time TDelay 50 100 ms Note: Stand-by current consumption may increase if V IH and V IL differ from VDD and 0 respectively. Note: See Note 6: Time Signal Software’s Pulse Width Recognition Limits and Table 5 on page 7! |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
