AD8150

–3–

REV. 0

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the AD8150 features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

MAXIMUM POWER DISSIPATION

The maximum power that can be safely dissipated by the AD8150

is limited by the associated rise in junction temperature. The

maximum safe junction temperature for plastic encapsulated

devices is determined by the glass transition temperature of

the plastic, approximately 150

°C. Temporarily exceeding this

limit may cause a shift in parametric performance due to a change

in the stresses exerted on the die by the package. Exceeding a

junction temperature of 175

°C for an extended period can result in

device failure.

While the AD8150 is internally short circuit protected, this may

not be sufficient to guarantee that the maximum junction temp-

erature (150

°C) is not exceeded under all conditions. To ensure

proper operation, it is necessary to observe the maximum power

derating curves shown in Figure 2.

ABSOLUTE MAXIMUM RATINGS

1

Internal Power Dissipation

2

AD8150 184-Lead Plastic LQFP (ST) . . . . . . . . . . . . . 4.2 W

Output Short Circuit Duration

. . . . . . . . . . . . . . . . . . . . . . Observe Power Derating Curves

Storage Temperature Range . . . . . . . . . . . . . –65

°C to +125°C

Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300

°C

NOTES

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

°C):

184-lead plastic LQFP (ST):

ORDERING GUIDE

Temperature

Package

Package

Model

Range

Description

Option

AD8150AST

0

°C to 85°C

184-Lead Plastic LQFP

ST-184

(20 mm

× 20 mm)

AD8150-EVAL

Evaluation Board

AMBIENT TEMPERATURE – C

–10

0

10

20

30

4050

60708090

2.0

3.0

4.0

5.0

6.0

1.0

Figure 2. Maximum Power Dissipation vs. Temperature