| 数据搜索系统,热门电子元器件搜索 |
|
ACT8600 数据表(PDF) 2 Page - Aeroflex Circuit Technology |
|
|
|||||||||||||||||||||||||||||
ACT8600 数据表(HTML) 2 Page - Aeroflex Circuit Technology |
|
2 / 5 page ![]() Aeroflex Circuit Technology 2 ACT8600 REV A 9/16/99 Plainview NY (516) 694-6700 Absolute Maximum Ratings Parameter Range Units Power Dissipation (PD) 20 W Operating (Junction) Temperature Range -55 to +150 °C Lead Temperature (soldering, 10 sec) 300 °C Storage Temperature Range -65 to +150 °C Input-Output Voltage Differential 40 V Thermal Resistance (junction to case ΘJC) 5 °C/W ESD Rating 2 KV NOTICE: Stresses above those listed under "Absolute Maximums Rating" may cause permanent damage to the device. These are stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure beyond the "Operation Conditions" may effect device reliability. Recommended Operating Conditions Parameter Range Units Output Voltage Range Positive Voltage Regulator Negative Voltage Regulator 1.2 to 37 -1.2 to -37 V dc V dc Ambient Operating Temperature Range -55 to +125 °C Input Voltage Range Positive Voltage Regulator Negative Voltage Regulator 4.25 to 41.25 -4.25 to -41.25 V dc V dc Positive Regulator Electrical Performance Characteristics (TA = -55°C to +125°C, IL = 8mA, Unless otherwise specified) Parameter Sym Conditions Min Max Units Reference Voltage VREF VDIF = 3.0V, TA = + 25°C 1.2 1.3 V VDIF = 3.3V 1.2 1.3 V VDIF = 40V 1.2 1.3 V Line Regulation RLINE 3.0V < VDIF < 40V, VOUT = VREF, TA = + 25°C - ±9 mV 3.3V < VDIF < 40V, VOUT = VREF - ±23 mV Load Regulation 1/ RLOAD VDIF = 3.0V, 10mA < IL < 1.5A, TA = + 25°C - ±15 mV VDIF = 3.3V, 10mA < IL < 1.5A - ±15 mV VDIF = 40V, 10mA < IL < 300mA, TA = + 25°C - ±15 mV VDIF = 40V, 10mA < IL < 195mA - ±15 mV Thermal Regulation VRTH VIN = +14.6V, IL = 300mA, t = 20ms, PD = 20W, TA = + 25°C - ±16 mV Ripple Rejection RN f = 120Hz, CADJ = 10µF, VOUT = VREF 2/ 66 - dB Adjustment Pin Current IADJ VDIF = 3.0V, TA = + 25°C - 100 µA VDIF = 3.3V - 100 µA VDIF = 40V - 100 µA Adjustment Pin Current Change ∆IADJ VDIF = 3.0V, 10mA < IL < 1.5A, TA = + 25°C - ±5 µA VDIF = 3.3V, 10mA < IL < 1.5A - ±5 µA VDIF = 40V, 10mA < IL < 300mA, TA = + 25°C - ±5 µA VDIF = 40V, 10mA < IL < 195mA - ±5 µA |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |