| 数据搜索系统,热门电子元器件搜索 |
|
A4910 数据表(PDF) 7 Page - Allegro MicroSystems |
|
|
|||||||||||||||||||||||||||||
A4910 数据表(HTML) 7 Page - Allegro MicroSystems |
|
7 / 36 page ![]() Automotive 3-Phase MOSFET Driver A4910 7 Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com Gate Output Drive (continued) Turn-Off Propagation Delay tP(off) Input change to unloaded gate output change (see figure 5) 60 90 140 ns Turn-On Propagation Delay tP(on) Input change to unloaded gate output change (see figure 5) 50 80 130 ns Propagation Delay Matching (Phase-to-Phase) ∆tPP Same phase change, DT[6..0] = 0 – 5 15 ns Propagation Delay Matching (On-to-Off) ∆tOO Single phase, DT[6..0] = 0 – 15 30 ns Propagation Delay Matching (GHx-to-GLx) ∆tHL Rising to rising edges, falling to falling edges, DT[6..0] = 0 – – 20 ns Logic Inputs and Outputs Input Low Voltage VIL RESETn pin – – 0.2 VDD V All other logic pins – – 0.3 VDD V Input High Voltage VIH 0.7 VDD –– V Input Hysteresis VIhys RESETn pin 200 350 – mV All other logic pins 250 500 – mV Input Pull-Up Resistor RPU STRn 30 50 70 kΩ Input Pull-Down Resistor RPD COASTn, RESETn, SCK, SDI, AHI, ALO, BHI, BLO, CHI, and CLO pins 30 50 70 kΩ Output Low Voltage VOL IOL= 1 mA – 0.2 0.4 V Output High Voltage2 VOH IOL = –1 mA VDD – 0.4 VDD – 0.2 – V Output Leakage (SDO pin)2 ISDOlkg 0 V < VSDO < VDD, STRn = 1 –1 – 1 μA Logic Inputs and Outputs Dynamic Parameters Reset Pulse Width tRST 0.2 – 4.5 μs Reset Shutdown Time tRSD 10 – – μs Clock High Time tSCKH A in figure 2 50 – – ns Clock Low Time tSCKL B in figure 2 50 – – ns Strobe Lead Time tSTLD C in figure 2 30 – – ns Strobe Lag Time tSTLG D in figure 2 30 – – ns Strobe High Time tSTRH E in figure 2 300 – – ns Data Out Enable Time tSDOE F in figure 2 – – 40 ns Data Out Disable Time tSDOD G in figure 2 – – 30 ns Data Out Valid Time from Clock Falling tSDOV H in figure 2 – – 40 ns Data Out Hold Time from Clock Falling tSDOH I in figure 2 5 – – ns ELECTRICAL CHARACTERISTICS (continued) Valid at TJ = –40°C to 150°C, VDD = 5 V, VBB = 7 to 50 V; unless otherwise specified Characteristic Symbol Test Conditions Min. Typ. Max. Unit Continued on the next page… |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |