P16E.pdf

Jul.15,2011

Conformal coating of the component is acceptable.

However, the resin material, curing temperature, and

other process conditions should be evaluated to confirm

stable electrical characteristics are maintained.

3. Coating

Continued from the preceding page.

5 minutes max. by air blow at +80

°C max.

(4) Drying

(a) Total washing time should be within 10 minutes.

(b) The component may be damaged if it is washed with

chlorine, petroleum, or alkali cleaning solvent.

(5) Others

(a) Ultrasonic Wash

1 minute max. in above solvent at +60

°C max.

(Frequency: 28kHz, Output: 20W/l)

(b) Immersion Wash

5 minutes max. in above solvent at +60

°C max.

(c) Shower or Rinse Wash

5 minutes max. in above solvent at +60

°C max.

(3) Conditions

Notice for Automotive

15

2

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.