DSPIC33FJMC202ESS datasheet(21/330 Pages) MICROCHIP

21 / 330 page

DS70283K-page 21

dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304

3.5

CPU Control Registers

SR: CPU STATUS REGISTER

R-0

R/C-0

R-0

R/C-0

R -0

R/W-0

SA(1)

SB(1)

OAB

SAB

bit 15

bit 8

R/W-0(3)

R-0

R/W-0

IPL<2:0>(2)

bit 7

bit 0

Legend:

C = Clear only bit

R = Readable bit

U = Unimplemented bit, read as ‘0’

S = Set only bit

W = Writable bit

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 15

OA: Accumulator A Overflow Status bit

1 = Accumulator A overflowed

0 = Accumulator A has not overflowed

bit 14

OB: Accumulator B Overflow Status bit

1 = Accumulator B overflowed

0 = Accumulator B has not overflowed

bit 13

SA: Accumulator A Saturation ‘Sticky’ Status bit(1)

1 = Accumulator A is saturated or has been saturated at some time

0 = Accumulator A is not saturated

bit 12

SB: Accumulator B Saturation ‘Sticky’ Status bit(1)

1 = Accumulator B is saturated or has been saturated at some time

0 = Accumulator B is not saturated

bit 11

OAB: OA || OB Combined Accumulator Overflow Status bit

1 = Accumulators A or B have overflowed

0 = Neither Accumulators A or B have overflowed

bit 10

SAB: SA || SB Combined Accumulator ‘Sticky’ Status bit

1 = Accumulators A or B are saturated or have been saturated at some time in the past

0 = Neither Accumulator A or B are saturated

Note:

This bit may be read or cleared (not set). Clearing this bit will clear SA and SB.

bit 9

DA: DO Loop Active bit

1 = DO loop in progress

0 = DO loop not in progress

bit 8

DC: MCU ALU Half Carry/Borrow bit

1 = A carry-out from the 4th low-order bit (for byte-sized data) or 8th low-order bit (for word-sized data)

of the result occurred

0 = No carry-out from the 4th low-order bit (for byte-sized data) or 8th low-order bit (for word-sized

data) of the result occurred

Note 1: This bit can be read or cleared (not set).

2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority

Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when

IPL<3> = 1.

3: The IPL<2:0> Status bits are read-only when NSTDIS = 1 (INTCON1<15>).

DSPIC33FJMC202ESS 数据表(PDF) 21 Page - Microchip Technology

DSPIC33FJMC202ESS 数据表(HTML) 21 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载