UG-287

Evaluation Board User Guide

Rev. B | Page 8 of 12

Register Access

Clicking Register Access in the menu bar of the main window

provides read/write access to all user-accessible registers in the

IMU. For example, Figure 13 demonstrates using this menu to

write 0x0009 to the DEC_RATE register in the ADIS16488 or

ADIS16375, which lowers the output data rate from 2.46 kSPS

to 246 SPS.

In this case,

1. Select Control from the Select a Category drop-down box

to access the control register group.

2. Click DEC_RATE in the register listing.

3. Type 9 in the New Hex Value box.

4. Click Write Register to write this value to the register

inside the IMU.

5. Click Update Flash to make this setting nonvolatile.

Figure 13. Register Access, Write DEC_RATE = 0x0009 Example