WL

WL

20

OF and RF for WLCA12-2N and WL01CA12-2N, with a lever length of 89 mm.

Operating

characteristics

WLCA12-2N, WL01CA12-2N

OF

4.10 N

RF

0.50 N

Cam direction changing procedure

Loosen the cam holder with

a coin or screwdriver. Take

out the cam from the Switch.

Change the direction of the cam

as required by your intended op-

eration and then reinstall the cam.

Relationship of cam to operation as

observed from the rear of Switch

Operation on both sides

Operation on one side

Operation on one side

Avoid this combination

Operates

Operates Operates

Operates

Does not operate

Does not operate

High-precision Models

The high-precision models feature a pretravel of 5° (as compared with 15° for the standard models) and a repeat accuracy twice as great as

standard models. The high-precision models are ideal for positioning control of machine tools.

Dimensions/Operating Characteristics

For all models WLj indicates a standard model and WL01j indicates a microload model.

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Operating characteristics

WLGCA2

WL01GCA2

Operating force: OF max.

13.34 N

Release force: RF min.

1.47 N

Pretravel: PT

+2

0

5°

Overtravel: OT min.

40°

Movement differential: MD max. 3°

Roller Lever

WLGCA2

WL01GCA2

Note:

Stainless sintered roller

M5 × 12

Allen-head

bolt

JIS B0202 G1/2

Effective thread:

4 threads min.

Four, M6

Depth: 15 min.

17.5 dia. × 7 (see note)

42 max.

Three, M4 × 13

Four, M3.5

60 max.

Four,

0

dia. holes