WL

WL

32

Operation

LIght-ON when operating

(See note 1.)

WL-LE

WL-LD

Power supply

Built-in switch

Load

Internal circuit

Light-ON when not operating

(See note 2.)

WL-LD

Power supply

Built-in switch

Internal circuit

WL-LE

Load

Note: 1. Light-ON when operating means that the lamp lights when the Limit Switch contacts (NC) release, or when the actuator rotates or is

pushed down.

2. Light-ON when not operating means the lamp remains lit when the actuator is free, or when the Limit Switch contacts (NO) close

when the actuator rotates or is pushed down.

Ordering Information

When ordering general-purpose indicator-equipped models insert the specifications number at the end of the basic model number.

E.g.: When a neon lamp is installed in a General-purpose/Standard Roller Lever Switch (WLCA2).

WLCA2

LE

""

Standard

Lamp

specifications

When ordering indicator-equipped molded terminal models, insert the specifications number at the end of the standard model number.

E.g.: When a Neon Lamp (WL-LE) is installed in a general-purpose molded terminal model (WLCA2-139).

WLCA2-139

LE

2

"""

Standard

Lamp

Lamp

2: NC connection: Light-ON when operating

specifications wiring

3: NO connection: Light-ON when not operating

Note:

The indicator cover cannot be replaced on the molded terminals. In all cases the indicator does not light when the load is ON.

Dimensions/Operating Characteristics

Roller Lever

WLCA2-LE

Note:

Unless otherwise indicated, a tolerance of ±0.4 mm applies

to all dimensions.

OF max.

13.34 N

RF min.

2.23 N

PT

15°±5°

OT min.

30°

MD max.

12°

17.5 dia. × 7

Stainless steel roller

Four, M3.5

M5 × 12

Allen-head

bolt

holes

Three, M4 × 13

JIS B0202 G1/2

Effective thread:

4 threads min.

Four, M6

Depth: 15 min

60 max.

42 max.

Four,

0

dia. holes