MIL-DTL-24308G

APPENDIX B

w/AMENDMENT 2

39

CONTACT PIN AND SOCKET

CLASSES G, N, AND H SOLDERTYPE,

NON-REMOVABLE

B.1 SCOPE

B1.1 Scope. This appendix covers contacts, pin and socket, classes G, N and H solder type, non-removable for

use with MIL-DTL-24308 rectangular, nonenvironmental, polarized shell, miniature, rack and panel connectors. This

Appendix is a mandatory part of the specification. The information contained herein is intended for compliance.

B.2 APPLICABLE DOCUMENTS

(This section not applicable to this appendix.)

B.3 GENERAL REQUIREMENTS

(This section not applicable to this appendix.)

B.4 DETAIL REQUIREMENTS

B.4.1 Dimensions and configurations. See table B-I and figures B-1 through B-6. The following details apply:

a. Dimensions are in inches.

b. Metric equivalents (to the nearest .01 mm) are given for information only.

c. Dimensions are after plating.

d. Reference documents shall be of the issue in effect on the date of invitation for bids.

e. For design feature purposes, this appendix takes precedence over procurement documents referenced

herein.

f. Lock ring optional - alternate retention for classes G and N connectors, figures B-1 and B-2.

TABLE B-I. Contact configurations.

Figure

number

Size

Contact

Type

Termination

Class

Superseded

MS number

B-1

20

Socket

Solder cup

G, N

MS18281-1

B-2

20

Pin

Solder cup

G, N

MS18281-2

B-3

20

Pin

Eyelet

H

MS18281-3

B-4

20

Pin

Solder cup

H

MS18281-4

B-5

22D

Socket

Solder cup

G,N

MS18281-5

B-6

22D

Pin

Solder cup

G,N

MS18281-6

FIGURE B-2. Pin, size 20 (solder cup) for

connector classes G,M ,N, and D.

FIGURE B-1. Socket, size 20 (solder cup) for

connector classes G, M, N, and D.

LOCKRING

Optional

(See B.4.1f)

.041DIA

.039