MIL-DTL-24308G

w/AMENDMENT 2

3

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-202

- Test Methods for Electronic and Electrical Component Parts

MIL-STD-790

- Standard Practice for Established Reliability and High Reliability Qualified Products List

(QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications

MIL-STD-1285

- Marking of Electrical and Electronic Parts

(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or from the Standardization

Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094)

2.2.2 Other Government documents drawings and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the

issues are those cited in the solicitation or contract.

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)

JSC SP-R-0022

- Vacuum Stability Requirements of Polymeric Material for Spacecraft Applications.

(Copies of these documents are available online at www.nasa.gov/centers/johnson/home/ or the NASA Johnson

Space Center 2101 NASA Parkway Houston, Texas 77058.)

2.3 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract

(see 6.2).

ASTM INTERNATIONAL

ASTM A342/A342M

- Test Method for Permeability of Feebly Magnetic Materials

ASTM B488

- Electrodeposited Coatings of Gold for Engineering Uses

ASTM B545

- Electrodeposited Coatings of Tin, Standard Specification For

ASTM B633

- Zinc on Iron and Steel, Electrodeposited Coatings Of

ASTM B733

- Autocatalytic Electroless Nickel-Phosphorus Coatings on Metal

ASTM B841

- Standard Specification for Electrodeposited of Zinc Nickel Alloy Deposits

ASTM E595

- Total Mass Loss and Collected Volatile Material from Outgassing in a Vacuum

- Environment, Condensable, Standard Test Method For

ASTM D4067

- Standard Classification System for Reinforced and Filled Poly(Phenylene

Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

ASTM D5927

- Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO

Test Methods

ASTM D5948

- Molding Compounds, Thermosetting, Standard Specification For

(Copies of these documents are available online at http://www.astm.org or

from the ASTM International, P.O.

Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

ELECTRONIC INDUSTRIES ASSOCIATION

EIA-364

- Electrical Connector/Socket Test Procedures Including Environmental Classifications

EIA-364-02

- Air Leakage Test Procedure for Electrical Connectors

EIA-364-05

- Contact Insertion, Release and Removal Force Test Procedure for

Electrical Connectors

EIA-364-06

- Contact Resistance Test Procedure for Electrical Connectors

EIA-364-09

- Durability Test Procedure for Electrical Connectors and Contacts

EIA-364-10

- Fluid Immersion Test Procedure for Electrical Connectors and Sockets

EIA/ECA-364-13 - Mating and Unmating Forces Test Procedure for Electrical Connectors and Sockets

EIA-364-20

- Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial

Contacts

EIA/ECA-364-21 - Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and Coaxial

Contacts