ADL6010

Preliminary Technical Data

Rev. PrB | Page 6 of 10

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

Figure 2.Pin Configuration

Table 4. Pin Function Descriptions

Pin No.

Mnemonic

Description

1, 4, 6, EPAD

GND

Device Ground Pins. Pin 1, 4 and 6 are ground pins and the metal slug on the underside of the chip must be

connected to a low impedance ground plane.

2

VOUT

Envelop Peak Output.

3

VPOS

Supply Voltage Pin. The operational range is from 2.5 V to 5.5 V.

5

RFIN

Signal Input Pin. This pin is ac-coupled and has an input impedance of approximately 50 ohms.