USB2513 datasheet(40/63 Pages) MICROCHIP

40 / 63 page

USB 2.0 Hi-Speed Hub Controller

Datasheet

Revision 2.2 (02-17-12)

SMSC USB251xB/xBi

DATASHEET

5.1.31

BIT

NUMBER

BIT NAME

DESCRIPTION

7:0

PRTR34

PortMap Register for Ports 3 and 4: When a hub is enumerated by a USB

host controller, the hub is only permitted to report how many ports it has; the

hub is not permitted to select a numerical range or assignment. The host

controller will number the downstream ports of the hub starting with the

number 1, up to the number of ports that the hub reports having.

The host's port number is called the Logical Port Number and the physical

port on the hub is the Physical Port Number. When mapping mode is

enabled (see PRTMAP_EN, Section 5.1.9 on page 32) the hub's

downstream port numbers can be mapped to different logical port numbers

(assigned by the host).

Note:

Contiguous logical port numbers must be implemented, starting

from number 1 up to the maximum number of enabled ports. This

ensures that the hub's ports are numbered in accordance with the

way a host will communicate with the ports.

Bit [7:4]

0000

Physical port 4 is disabled

0001

Physical port 4 is mapped to logical port 1

0010

Physical port 4 is mapped to logical port 2

0011

Physical port 4 is mapped to logical port 3

0100

Physical port 4 is mapped to logical port 4

1000

1111

rsvd, will default to 0000 value

Bit [3:0]

0000

Physical port 3 is disabled

0001

Physical port 3 is mapped to logical port 1

0010

Physical port 3 is mapped to logical port 2

0011

Physical port 3 is mapped to logical port 3

0100

Physical port 3 is mapped to logical port 4

1000

1111

rsvd, will default to 0000 value

USB2513 数据表(PDF) 40 Page - Microchip Technology

USB2513 数据表(HTML) 40 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

数据表下载