LM92

www.ti.com

SNIS110D – MARCH 2000 – REVISED MARCH 2013

Typical Application

Figure 1.

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1)

Supply Voltage

−0.3 V to 6.5V

Voltage at any Pin

Input Current at any Pin

5 mA

20 mA

T_CRIT_A and INT Output Sink Current

10 mA

T_CRIT_A and INT Output Voltage

6.5V

Storage Temperature

−65°C to +125°C

Human Body Model

2500V

Machine Model

250V

Soldering process must comply with Reflow Temperature Profile specifications. Refer to http://www.ti.com/lit/SNOA549.(4)

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not

apply when operating the device beyond its rated operating conditions.

(2)

mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input

current of 5 mA to four.

(3)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor. Machine model, 200 pF discharged directly into each pin.

(4)

Reflow temperature profiles are different for lead-free and non-lead-free packages.

Operating Ratings

(1) (2)

−55°C to +150°C

+2.7V to +5.5V

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not

apply when operating the device beyond its rated operating conditions.

(2)

LM92

(3)

While the LM92 has a full-scale-range in excess of 128°C, prolonged operation at temperatures above 125 °C is not recommended.

Copyright © 2000–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: LM92