| 数据搜索系统,热门电子元器件搜索 |
|
TUSB2046BVF 数据表(PDF) 7 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TUSB2046BVF 数据表(HTML) 7 Page - Texas Instruments |
|
7 / 25 page ![]() TUSB2046B TUSB2046BI www.ti.com SLLS413I – FEBRUARY 2000 – REVISED SEPTEMBER 2013 ELECTRICAL CHARACTERISTICS over recommended ranges of operating free-air temperature and supply voltage (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT TTL/LVCMOS IOH = –4 mA VCC – 0.5 VOH High-level output voltage R(DRV) = 15 kΩ to GND 2.8 V USB data lines IOH = –12 mA (without R(DRV)) VCC – 0.5 TTL/LVCMOS IOL = 4 mA 0.5 VOL Low-level output voltage R(DRV) = 1.5 kΩ to 3.6 V 0.3 V USB data lines IOL = 12 mA (without R(DRV)) 0.5 TTL/LVCMOS 1.8 VIT+ Positive input threshold V Single-ended 0.8 V ≤ VICR ≤ 2.5 V 1.8 TTL/LVCMOS 0.8 VIT– Negative-input threshold V Single-ended 0.8 V ≤ VICR ≤ 2.5 V 1 TTL/LVCMOS 0.3 0.7 Input hysteresis(1) Vhys mV (VT+ – VT–) Single-ended 0.8 V ≤ VICR ≤ 2.5 V 300 500 TTL/LVCMOS V = VCC or GND (2) ±10 IOZ High-impedance output current μA USB data lines 0 V ≤ VO ≤ VCC ±10 IIL Low-level input current TTL/LVCMOS VI = GND –1 μA IIH High-level input current TTL/LVCMOS VI = VCC 1 μA z0(DRV) Driver output impedance USB data lines Static VOH or VOL 7.1 19.9 Ω VID Differential input voltage USB data lines 0.8 V ≤ VICR ≤ 2.5 V 0.2 V Normal operation 40 mA ICC Input supply current Suspend mode 1 μA (1) Applies for input buffers with hysteresis. (2) Applies for open drain buffers. DIFFERENTIAL DRIVER SWITCHING CHARACTERISTICS Full Speed Mode over recommended ranges of operating free-air temperature and supply voltage, CL = 50 pF (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT tr Transition rise time for DP or DM See Figure 1 and Figure 2 4 20 ns tf Transition fall time for DP or DM See Figure 1 and Figure 2 4 20 ns t(RFM) Rise/fall time matching(1) (tr/tf) × 100 90 110 % VO(CRS) Signal crossover output voltage (1) 1.3 2.0 V (1) Characterized only. Limits are approved by design and are not production tested. DIFFERENTIAL DRIVER SWITCHING CHARACTERISTICS Low Speed Mode over recommended ranges of operating free-air temperature and supply voltage, CL = 50 pF (unless otherwise noted) PARAMETER TEST CONDITIONS MIN MAX UNIT tr Transition rise time for DP or DM(1) CL = 200 pF to 600 pF, See Figure 1 and Figure 2 75 300 ns tf Transition fall time for DP or DM(1) CL = 200 pF to 600 pF, See Figure 1 and Figure 2 75 300 ns t(RFM) Rise/fall time matching(1) (tr/tf) × 100 80 120 % VO(CRS) Signal crossover output voltage (1) CL = 200 pF to 600 pF 1.3 2.0 V (1) Characterized only. Limits are approved by design and are not production tested. Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Links: TUSB2046B TUSB2046BI |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |