MP3391EY datasheet(3/18 Pages) MPS

3 / 18 page

MP3391—8-CHANNEL, 120mA/CH STEP-UP WLED DRIVER CONTROLLER

MP3391 Rev. 1.11

www.MonolithicPower.com

3/14/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

Free Air Temperature (TA)

MP3391EF*

TSSOP28

MP3391EF

-20

°C to +85°C

MP3391EY**

SOIC28

MP3391EY

-20

°C to +85°C

For Tape & Reel, add suffix –Z (eg. MP3391EF–Z).

For RoHS compliant packaging, add suffix –LF (eg. MP3391EF–LF–Z)

For Tape & Reel, add suffix –Z (eg. MP3391EY–Z).

For RoHS compliant packaging, add suffix –LF (eg. MP3391EY–LF–Z)

PACKAGE REFERENCE

TSSOP28

SOIC28

ABSOLUTE MAXIMUM RATINGS

(1)

VIN .................................................-0.3V to +40V

VFAULT ..............................................VIN-6V to VIN

VGATE ...............................................-0.5V to 12V

VLED1 to VLED8....................................-1V to +55V

All Other Pins...............................-0.3V to +6.3V

Continuous Power Dissipation (TA = +25°C)

(2)

TSSOP28……………………………… ...3.9 W

SOIC28………………………………… ...2.1W

Junction Temperature...............................150

°C

Lead Temperature ....................................260

°C

Storage Temperature............... -65

°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..............................9V to 35V

LED Current (Backlight) ...........10mA to 120mA

Maximum Junction Temp. (TJ) ................+125°C

Thermal Resistance

(4)

θJA

θJC

TSSOP28................................32 ....... 6 ....

°C/W

SOIC28 ..................................60 ...... 30 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operation conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP3391EY 数据表(PDF) 3 Page - Monolithic Power Systems

MP3391EY 数据表(HTML) 3 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

数据表下载