MP28248GD datasheet(2/19 Pages) MPS

2 / 19 page

MP28248 – 3A, 4.2V-20V INPUT, FAST-TRANSIENT SYNCHRONOUS STEP-DOWN CONVERTER IN QFN12 (2X3mm)

MP28248 Rev 1.0

www.MonolithicPower.com

1/5/2012

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

MP28248GD*

QFN12 (2x3mm)

ACR

*For Tape & Reel, add suffix –Z (e.g. MP28248GD–Z).

PACKAGE REFERENCE

GND

BST

VCC

GND

FREQ

TOP VIEW

GND

QFN12 (2x3mm)

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ....................................... 22V

VSW..................................... -0.3V to (VIN + 0.3V)

VBS ....................................................... VSW + 6V

IVIN (RMS)........................................................ 3.5A

All Other Pins..................................-0.3V to +6V

Continuous Power Dissipation

(TA = 25°C)

(2)

QFN12 (2X3mm)........................................ 1.8W

Junction Temperature ..............................150°C

Lead Temperature ....................................260°C

Storage Temperature............... -65°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ...........................4.2V to 20V

Output Voltage VOUT.....................0.815V to 13V

Maximum Junction Temp. (TJ) ... -40°C to 125°C

Thermal Resistance

(4)

θJA

θJC

QFN12 (2mmx3mm)............... 70 ...... 15... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP28248GD 数据表(PDF) 2 Page - Monolithic Power Systems

MP28248GD 数据表(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

数据表下载