50 MHz to 4.0 GHz

RF/IF Gain Block

Data Sheet

ADL5601

Rev. A

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2009–2013 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

Fixed gain of 15 dB

Operation from 50 MHz to 4.0 GHz

Highest dynamic range gain block

Input/output internally matched to 50 Ω

Integrated bias control circuit

OIP3 of 43.0 dBm at 900 MHz

P1dB of 19.0 dBm at 900 MHz

Noise figure of 3.7 dB at 900 MHz

Single 5 V power supply

Low quiescent current of 83 mA

Thermally efficient SOT-89 package

ESD rating of ±1.5 kV (Class 1C)

FUNCTIONAL BLOCK DIAGRAM

RFIN

GND

RFOUT

1

2

3

GND

ADL5601

(2)

BIAS

Figure 1.

GENERAL DESCRIPTION

The ADL5601 is a broadband, 15 dB linear amplifier that operates

at frequencies up to 4.0 GHz. The device can be used in a wide

variety of cellular, cable television (CATV), military, and instru-

mentation equipment.

The ADL5601 provides the highest dynamic range available

from an internally matched gain block. This is accomplished by

providing extremely low noise figures and very high OIP3 speci-

fications simultaneously, across the entire 4.0 GHz frequency range.

The ADL5601 provides a gain of 15 dB, which is stable over

frequency, temperature, and supply voltage, as well as from device

to device. The device is internally matched to 50 Ω at the input

and output, making the ADL5601 very easy to implement in a wide

variety of applications. Only input/output ac coupling capacitors,

power supply decoupling capacitors, and an external inductor

are required for operation.

The ADL5601 is fabricated on an InGaP heterojunction bipolar

transistor (HBT) process and has an ESD rating of ±1.5 kV

(Class 1C). The device is available in a thermally efficient SOT-89

package.

The ADL5601 consumes 83 mA on a single 5 V supply and is

fully specified for operation from −40°C to +85°C.

A fully populated RoHS-compliant evaluation board is

available.