NG80960JS25 datasheet(41/86 Pages) INTEL

41 / 86 page

80960JA/JF/JD/JS/JC/JT 3.3 V Embedded 32-Bit Microprocessor

Datasheet

ICC5 Current on the

VCC5 Pin

80960JT-100

80960JC-66

80960JC-50

80960JS-33

80960JS-25

80960JD-66

80960JD-50

80960JD-40

80960JD-33

80960JA/JF-33

80960JA/JF-25

80960JA-16

200

µA

(6)

NOTES:

1. These pins have internal pullup devices. Typical leakage current is not tested.

2. Measured with device operating and outputs loaded to the test condition in Figure 10, “A.C. Test Load” on

page 45.

3. ICC Active (Power Supply) value is provided for selecting your system’s power supply. It is measured using

one of the worst case instruction mixes with VCC = 3.45 V. This parameter is characterized but not tested.

4. ICC Active (Thermal) value is provided for your system’s thermal management. Typical ICC is measured

with VCC =3.3 V and temperature = 25° C. This parameter is characterized but not tested.

5. ICC Test (Power modes) refers to the ICC values that are tested when the 80960JD is in Reset mode, Halt

mode or ONCE mode with VCC = 3.45 V.

6. ICC5 is tested at VCC = 3.3 V, VCC5 = 5.25 V.

Table 21. 80960Jx ICC Characteristics (Sheet 3 of 3)

Symbol

Parameter

Typ

Max

Units

Notes

NG80960JS25 数据表(PDF) 41 Page - Intel Corporation

NG80960JS25 数据表(HTML) 41 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

数据表下载