ADC0803 datasheet(34/49 Pages) TI1

34 / 49 page

ADC0801, ADC0802

ADC0803, ADC0804, ADC0805

SNOSBI1B – NOVEMBER 2009 – REVISED FEBRUARY 2013

www.ti.com

SAMPLE PROGRAM FOR Figure 60 ADC0801–MC6820 PIA INTERFACE

The following schematic and sample subroutine (DATA IN) may be used to interface (up to) 8 ADC0801’s directly

to the MC6800 CPU. This scheme can easily be extended to allow the interface of more converters. In this

configuration the converters are (arbitrarily) located at HEX address 5000 in the MC6800 memory space. To

save components, the clock signal is derived from just one RC pair on the first converter. This output drives the

other A/Ds.

All the converters are started simultaneously with a STORE instruction at HEX address 5000. Note that any other

HEX address of the form 5XXX will be decoded by the circuit, pulling all the CS inputs low. This can easily be

avoided by using a more definitive address decoding scheme. All the interrupts are ORed together to insure that

all A/Ds have completed their conversion before the microprocessor is interrupted.

The subroutine, DATA IN, may be called from anywhere in the user’s program. Once called, this routine

initializes the CPU, starts all the converters simultaneously and waits for the interrupt signal. Upon receiving the

interrupt, it reads the converters (from HEX addresses 5000 through 5007) and stores the data successively at

(arbitrarily chosen) HEX addresses 0200 to 0207, before returning to the user’s pro- gram. All CPU registers then

recover the original data they had before servicing DATA IN.

Auto-Zeroed Differential Transducer Amplifier and A/D Converter

The differential inputs of the ADC0801 series eliminate the need to perform a differential to single ended

conversion for a differential transducer. Thus, one op amp can be eliminated since the differential to single ended

conversion is provided by the differential input of the ADC0801 series. In general, a transducer preamp is

required to take advantage of the full A/D converter input dynamic range.

Submit Documentation Feedback

Product Folder Links: ADC0801, ADC0802 ADC0803, ADC0804, ADC0805

ADC0803 数据表(PDF) 34 Page - Texas Instruments