| 数据搜索系统,热门电子元器件搜索 |
|
STP16DPPS05 数据表(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STP16DPPS05 数据表(HTML) 1 Page - STMicroelectronics |
|
1 / 35 page ![]() This is information on a product in full production. June 2014 DocID15817 Rev 3 1/35 STP16DPPS05 Low voltage 16-bit constant current LED sink driver with output error detection and auto power-saving Datasheet - production data Features • Low voltage power supply down to 3 V • 16 constant current output channels • Adjustable output current through external resistor • Short and open output error detection • Serial data IN/parallel data OUT • Auto power-saving • 3.3 V MCU-driving capability • Output current: 3 to 40 mA • 30 MHz clock frequency • Available in high thermal efficiency TSSOP exposed pad • ESD protection: 2 kV HBM, 200 V MM Description The STP16DPPS05 is a monolithic, low voltage, low current power 16-bit shift register designed for LED panel displays. The device features a 16-bit serial-in, parallel-out shift register that feeds a 16-bit D-type storage register. In the output stage, sixteen regulated current sources are designed to provide 3 to 40 mA of constant current to drive the LEDs. The STP16DPPS05 features open and short LED detection on the outputs. The detection circuit checks for 3 different conditions that can occur on the output line: short to GND, short to VO or open line. The data detection results are loaded in the shift registers and shifted out via the serial line output. The detection functionality is implemented without increasing the pin count, through a secondary function of the output enable and latch pin (DM1 and DM2 respectively). A dedicated logic sequence allows the device to enter or exit from detection mode. The STP16DPPS05 output current can be adjusted through an external resistor to control the light intensity of the LEDs. LED brightness is adjustable from 0% to 100% via the OE/DM2 pin. The auto power-shutdown and auto power-ON feature allows the device to save power with no external intervention. The STP16DPPS05 guarantees a 20 V output driving capability, allowing users to connect more LEDs in series. The high 30 MHz clock frequency makes the device suitable for high data rate transmission. The 3.3 V supply is well suited for applications which interface a 3.3 V MCU. Compared to a standard TSSOP package, the TSSOP with exposed pad increases heat dissipation capability by a factor of 2.5 SO-24 TSSOP24 TSSOP24 (exposed pad) QSOP-24 Table 1. Device summary Order codes Package Packaging STP16DPPS05MTR SO-24 (tape and reel) 1000 parts per reel STP16DPPS05TTR TSSOP24 (tape and reel) 2500 parts per reel STP16DPPS05XTTR TSSOP24 exposed pad (tape and reel) 2500 parts per reel STP16DPPS05PTR QSOP-24 2500 parts per reel www.st.com |
类似零件编号 - STP16DPPS05 |
|
类似说明 - STP16DPPS05 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |