AN2061

12/15

within the limits published in the Data Sheet (see relevant product documentation).

Failure to do so, could result in degraded reliability (lower number of erase cycles, lower data

retention).

4.3.2.4 ST10 PLL Unlock

As the Flash programing / erasing timings are not defined by the ST10 CPU core, PLL unlock

has no effect on the Flash erasing and programming. Usually, PLL unlock will stop communi-

cation because of change in bit/baud rate.

Detection Method:

Not necessary from ST10 point of view (to be checked with application specific constraints).

Suggested Handling Method:

Application dependent.