UM0313

Graphical User Interface

21/33

3.10

“Click” tab

LIS302DL MEMS sensor. This function allows the recognition of a “Single Click” and a

“Double Click” event and provides an interrupt when the event occurs.

Acceleration data (top section) and recognized click events (bottom section) are plotted in

real-time for each axis. On the bottom the level of the Interrupt is plotted . This tab provides

direct access to the registers (TAP_THSY_X, TAP_THSZ, TAP_DURATION,

TAP_LATENCY, TAP_WINDOW), allowing the user to fully configure the “Click Recognition”

function and the external interrupt lines.

Two buttons allow the user to set standard values for single and double click.

Figure 19.

Click tab