Data acquisition quick start

UM0313

22/33

3.11

“FFT” tab

The spectral data are updated every sample and are calculated on a 64-sample moving

window.

Figure 20.

FFT tab

4

Data acquisition quick start

This section describes the basic steps that must be performed to acquire the acceleration

data from the EK302DL:

1.

connect the EK302DL to the USB port;

2.

start the EK302DL GUI;

3.

select the Virtual COM port and click on the “Connect” button (Figure 9, ref 1);

4.

select the destination file to which the acceleration data must be saved by clicking

“Browse” (Figure 9, ref 2) in Save section (optional);

5.

use the Tab Menu to display the desired function (optional);

6.

click on the “Start” button to activate the sensor data collection and screen plotting

functions;

7.

click on the “Start saving” button to activate the sensor data saving to file;

8.

click on the “Stop saving” button to stop the sensor data saving;