数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

AN302 数据表(PDF) 6 Page - STMicroelectronics

部件名 AN302
功能描述  The purpose of this note is to familiarize
PDF  10 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 STMICROELECTRONICS - STMicroelectronics

AN302 数据表(HTML) 6 Page - STMicroelectronics

Back Button AN302 Datasheet HTML 2Page - STMicroelectronics AN302 Datasheet HTML 3Page - STMicroelectronics AN302 Datasheet HTML 4Page - STMicroelectronics AN302 Datasheet HTML 5Page - STMicroelectronics AN302 Datasheet HTML 6Page - STMicroelectronics AN302 Datasheet HTML 7Page - STMicroelectronics AN302 Datasheet HTML 8Page - STMicroelectronics AN302 Datasheet HTML 9Page - STMicroelectronics AN302 Datasheet HTML 10Page - STMicroelectronics  
Zoom Inzoom in Zoom Outzoom out
 6 / 10 page
background image
Holding current - the details
AN302
6/10
Depending on the production batch, the holding current can vary. However, the dispersion
always remains below the limits specified in the data sheet. For a better perspective, here
are some figures:
sensitive TRIAC: IGT (QI): 5 mA (type TW), 2 mA < IH < 8 mA (specified IH max: 10 mA)
standard TRIAC: IGT (QI): 50 mA (type B), 8 mA < IH < 40 mA (specified IH max: 50
mA)
The minimum value of the IH parameter is not specified in the data sheets.
2.2
Variation of the holding current
2.2.1
Typical variation of IH with device sensitivity and direction of
commutation
The holding current, IH, is related to the gate firing current, IGT as shown in Table 1.
Example:
BTA/BTB12-600TW: if IGT (QI) = 1.5 mA then IH+ = 3.8 mA.
BTA/BTB12-600C: if IGT (QI) = 10 mA then IH+ = 14 mA.
In the case of the TRIAC (as opposed to the thyristor), it is important to note that current IH-
(electrode A2 negative with respect to A1) can be higher or lower than IH+ according to the
rated current and the device technology.
Example:
BTA/BTB06-600TW: if IH+ = 4.3 mA, IH- = 4.8 mA.
BTA/BTB12-600C: if IH+ = 15 mA, IH- = 8.3 mA.
2.2.2
Variation of IH with junction temperature
The holding current is physically related to the firing current, IGT. These two parameters vary
with the junction temperature as shown in Figure 7.
Example:
Triac TO-220AB, type BTA/BTB12-600C: IH = 20 mA at Tj = 25 °C and 14 mA at 110 °C.
Table 1.
Ratio between IH+ and IGT (QI) for sensitive and standard TRIACs
Triac
IH+ / IGT (QI)
Sensitive TRIAC 12 Arms (TW type)
2.5 (approx.)
Standard TRIAC 12 Arms (C type)
1.4 (approx.)
Table 2.
Ratio between IH+ and IH- for sensitive and standard TRIACs
Triac
IH+ / IH-
Sensitive TRIAC 12 Arms (TW type)
0.9 (approx.)
Standard TRIAC 12 Arms (C type)
1.8 (approx.)



Html Pages

1 2 3 4 5 6 7 8 9 10


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com