AN3307 datasheet(5/37 Pages) STMICROELECTRONICS

5 / 37 page

AN3307

Package variation overview

Doc ID 18186 Rev 4

5/37

Package variation overview

The STM32F0xx package is based on Cortex Microcontroller Software Interface Standard

(CMSIS) and STM32F0xx Standard peripheral library V1.0.0 published by ST. It supports

STM32F050xx microcontrollers where the Flash memory density ranges between 32 and

64 Kbytes.

The STM32F10x package is based on CMSIS and STM32F10x Standard peripheral library

V3.5.0 published by ST. Available configurations support the following devices in the

STM32F10x family in range of this Standard peripheral library revision:

■ Low, medium and high density Performance line devices

■ Low, medium and high density Access line devices

■ Low, medium and high density Value Line devices

The STM32F3xx package is based on CMSIS, STM32F30x and STM32F37x Standard

peripheral libraries V0.1.0 published by ST. It supports STM32F30x and STM32F37x

microcontrollers where the Flash memory density ranges between 64 and 256 Kbytes.

These associated firmware packages are available upon request only. Please contact your

local ST sales office for more information.

Two projects have been prepared and tested for each package under IAR/EWARM™

version 6.40 and KEIL™/MDK-ARM™ version 4.50 environment and toolchains.

For more EMC information please refer to the following related application notes:

●

AN1015 application note, Software techniques for improving microcontroller EMC

performance

●

AN1709 application note, EMC design guide.

For more detailed information about cyclic redundancy check calculation (CRC) please refer

to the following related application note:

●

AN4187: Using the CRC peripheral in STM32 family.

AN3307 数据表(PDF) 5 Page - STMicroelectronics