AN3427 datasheet(9/52 Pages) STMICROELECTRONICS

9 / 52 page

AN3427

Peripheral migration

Doc ID 019001 Rev 1

9/52

Peripheral migration

As shown in Table 2 on page 9, there are three categories of peripherals. The common

peripherals are supported with the dedicated firmware library without any modification,

except if the peripheral instance is no longer present, you can change the instance and of

course all the related features (clock configuration, pin configuration, interrupt/DMA

request).

The modified peripherals such as: FLASH, ADC, RCC, DMA, GPIO and RTC are different

from the F1 series ones and should be updated to take advantage of the enhancements and

the new features in F2 series.

All these modified peripherals in the F2 series are enhancements in performance and

features designed to meet new market requirements and to fix some limitations present in

the F1 series.

3.1

STM32 product cross-compatibility

The STM32 series embeds a set of peripherals which can be classed in three categories:

●

The first category is for the peripherals which are by definition common to all products.

Those peripherals are identical, so they have the same structure, registers and control

bits. There is no need to perform any firmware change to keep the same functionality at

the application level after migration. All the features and behavior remain the same.

●

The second category is for the peripherals which are shared by all products but have

only minor differences (in general to support new features), so migration from one

product to another is very easy and does not need any significant new development

effort.

●

The third category is for peripherals which have been considerably changed from one

product to another (new architecture, new features...). For this category of peripherals,

migration will require new development at application level.

Table 2 below gives a general overview of this classification:

Table 2.

STM32 peripheral compatibility analysis F1 versus F2 series

Peripheral

F1 series

F2 series

Compatibility

Comments

Pinout

SW compatibility

FSMC

Yes

Same features

Identical

Full compatibility

WWDG

Yes

Same features

Full compatibility

IWDG

Yes

Same features

Full compatibility

DBGMCU

Yes

Same features

Full compatibility

CRC

Yes

Same features

Full compatibility

EXTI

Yes

Same features

Identical

Full compatibility

CAN

Yes

Same features

Identical

Full compatibility

AN3427 数据表(PDF) 9 Page - STMicroelectronics

AN3427 数据表(HTML) 9 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表下载

链接网址

AN3427 数据表(PDF) 9 Page - STMicroelectronics

AN3427 数据表(HTML) 9 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表 下载

链接网址

数据表下载