数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

UM0844 数据表(PDF) 10 Page - STMicroelectronics

部件名 UM0844
功能描述  This manual provides application developers with a first introduction
PDF  43 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 STMICROELECTRONICS - STMicroelectronics

UM0844 数据表(HTML) 10 Page - STMicroelectronics

Back Button UM0844 Datasheet HTML 6Page - STMicroelectronics UM0844 Datasheet HTML 7Page - STMicroelectronics UM0844 Datasheet HTML 8Page - STMicroelectronics UM0844 Datasheet HTML 9Page - STMicroelectronics UM0844 Datasheet HTML 10Page - STMicroelectronics UM0844 Datasheet HTML 11Page - STMicroelectronics UM0844 Datasheet HTML 12Page - STMicroelectronics UM0844 Datasheet HTML 13Page - STMicroelectronics UM0844 Datasheet HTML 14Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 43 page
background image
The pre-flashed software
UM0844
10/43
Doc ID 16544 Rev 3
Note:
If there is no global configuration file, minicom will not start. You first need to create one by
running the following command from a root shell:
# minicom -s
and then follow the normal configuration procedure.
The serial connection information can be configured in the 'configure minicom' submenu
and then 'Serial port setup'. After that, the configuration must be saved using the 'Save
setup as' option. The serial device name to be entered must match the one used for the link
to the SPEAr evaluation board. For example, the first serial port on Linux PC is named
/dev/ttyS0.
Select the serial speed as 115200 bps with 8 bit, no parity and 1 stop bit (115200 8N1) and
disable both hardware and software flow control.
Figure 3.
Minicom serial port configuration (Linux PC)
To save a new default configuration which is automatically used by minicom, select "Save
setup as dfl".
Alternatively, to create a new configuration file select "Save setup as..". In order to use it,
you have to specify the configuration file name in the command line when invoking minicom.
Please note that by default minicom tries to initialize a "modem" connected to the specific
interface you have chosen. To skip this step you can invoke minicom with the -o option as
follows:
$ minicom -o
2.2
Overview of Flash contents and structure
On all evaluation boards, the default software is only pre-stored into serial NOR Flash. The
use of other memory types available on some evaluation boards (NAND, parallel NOR)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com