US2076A

Preliminary

CMOS IC

UNISONICTECHNOLOGIESCO.,LTD

6 of 8

www.unisonic.com.tw

QW-R502-446.a

APPLICATIONS INFORMATION

Supply filtering

In order to control supply transients, a bypass capacitor is located nearly between IN to GND. 0.1µF ~ 1µF is

suitable (See Figure 1). Without a bypass capacitor, an output short may cause sufficient ringing on the input (from

supply lead inductance) to damage internal control circuitry.

Enable Input

For a clearly defined input, the EN pin must be driven logic high or logic low. Floating the input may cause

unpredictable operation. EN should not be allowed to go negative with respect to GND.

Soft Start

The UTC US2076A is high impedance when off and slowly becomes a low impedance as it turns on. This reduces

inrush current and related voltage drop that results from charging a capacitive load, satisfying the USB voltage drop

requirements, for bus-powered applications as shown in Figure 2.