UNISONIC TECHNOLOGIES CO., LTD

US2076A

Preliminary

CMOS IC

www.unisonic.com.tw

1 of 8

Copyright © 2010 Unisonic Technologies Co., Ltd

QW-R502-446.a

DUAL USB HIGH-SIDE POWER

SWITCH

DESCRIPTION

The UTC U2076A is a dual integrated high-side power switch

particularly designed for self-powered and bus-powered Universal

Serial Bus (USB) applications.

The UTC U2076A meets the requirements of the USB. The low

on-resistance of the switch satisfies USB voltage drop requirements.

Fault current is limited to typically 750mA, well below the UL 25VA

safety requirement. Flag outputs are available to indicate fault

conditions to the local USB controller. In addition, soft start can

eliminate the momentary voltage drop which is generated on the

upstream port that may occur when the switch is enabled in

bus-powered applications.

This device has independent functions enable and flag, and an

enable input is compatible with both 3.3V and 5V logic.

The UTC U2076A includes protection circuits. Thermal shutdown

circuit is designed to protect the device from being damaged when

high-current loads exist. UVLO (Under-voltage lockout) is used to keep

the device off unless there is a valid input voltage present.

The UTC U2076A is use in applications, such as USB host and

self-powered hubs, bus-powered hubs, hot plug-in power supplies,

and battery-charger circuits.

FEATURES

* MOSFET with Low On-Resistance: 140mΩ max.@5.0V per Channel

* Continuous Load Current: 500mA (MIN.) per Channel

* Off-State Supply Current: 1µA (TYP.)

* Output can be Forced Higher than Input (Off-State)

* Current Limit up to 1.25A (MAX.)

* Input Supply Voltage: 3.0V ~ 5.5V

* On-State Supply Current: 110µA (TYP.)

* Thermal Shutdown Protection Circuit

* UVLO (Undervoltage Lockout): 2.4V (TYP.)

* Open-Drain Fault Flag

* 1ms Turn-On (Soft-Start) and Fast Turn-Off

* Compliant to USB Specifications

* Available with Active-Low Enable

SOP-8

ORDERING INFORMATION

Ordering Number

Package

Packing

US2076AG-S08-R

SOP-8

Tape Reel