HCS515-IP datasheet(10/28 Pages) MICROCHIP

10 / 28 page

HCS515

DS40183D-page 10

4.2.3

COMMAND ACTIVATION TIMES

The command activation time (Table 4-1) is defined as

the maximum time the microcontroller has to wait for a

response from the decoder. The decoder will abort and

service the command request. The response time

depends on the state of the decoder when the Com-

mand mode is requested.

TABLE 4-1:

COMMAND ACTIVATION TIMES

4.2.4

DECODER COMMANDS

The command byte specifies the operation required by

the controlling microcontroller. Table 4-2 lists the com-

mands.

TABLE 4-2:

DECODER COMMANDS

Decoder State

Min

Max

While receiving transmissions

—

2.5 ms BPWMAX = 2.7 ms

During the validation of a received transmission

—

3 ms

During the update of the sync counters

—

40 ms

During learn

—

170 ms

Instruction

Command Byte

Operation

READ

F0 HEX

Read a byte from user EEPROM

WRITE

E1 HEX

Write a byte to user EEPROM

ACTIVATE_LRN

D2 HEX

Activate a learn sequence on the decoder

ERASE_ALL

C3 HEX

Activate an erase all function on the decoder

PROGRAM

B4 HEX

Program manufacturer’s code and configuration byte

HCS515-IP 数据表(PDF) 10 Page - Microchip Technology

HCS515-IP 数据表(HTML) 10 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

数据表下载