AM29F016D datasheet(21/45 Pages) AMD

21 / 45 page

Am29F016D

Command Definitions

Table 9.

Am29F016D Command Definitions

Legend:

X = Don’t care

RA = Address of the memory location to be read.

RD = Data read from location RA during read operation.

PA = Address of the memory location to be programmed.

Addresses latch on the falling edge of the WE# or CE# pulse,

whichever happens later.

PD = Data to be programmed at location PA. Data latches on

the rising edge of WE# or CE# pulse, whichever happens first.

SA = Address of the sector to be verified (in autoselect mode)

or erased. Address bits A20–A16 select a unique sector.

SGA = Address of the sector group to be verified. Address

bits A20–A18 select a unique sector group.

Notes:

1. See Table 1 for description of bus operations.

2. All values are in hexadecimal.

3. Except when reading array or autoselect data, all bus

cycles are write operations.

4. Address bits A20–A11 are don’t cares for unlock and

command cycles, unless SA or PA required.

5. No unlock or command cycles required when reading

array data.

6. The Reset command is required to return to reading array

data when device is in the autoselect mode, or if DQ5

goes high (while the device is providing status data).

7. The fourth cycle of the autoselect command sequence is

a read cycle.

8. The data is 00h for an unprotected sector group and 01h

for a protected sector group.See “Autoselect Command

Sequence” for more information.

9. Command is valid when device is ready to read array data

or when device is in autoselect mode.

10. The Unlock Bypass command is required prior to the

Unlock Bypass Program command.

11. The Unlock Bypass Reset command is required to return

to reading array data when the device is in the unlock

bypass mode.

12. The system may read and program in non-erasing

sectors, or enter the autoselect mode, when in the Erase

Suspend mode. The Erase Suspend command is valid

only during a sector erase operation.

13. The Erase Resume command is valid only during the

Erase Suspend mode.

Command

Sequence

(Note 1)

Bus Cycles (Notes 2–4)

First

Second

Third

Fourth

Fifth

Sixth

Addr

Data

Addr

Data

Addr

Data Addr

Data

Addr Data

Addr

Data

Read (Note 5)

Reset (Note 6)

XXX

Autoselect

(Note 7)

Manufacturer ID

555

2AA

555

X00

Device ID

555

2AA

555

X01

Sector Group Protect

Verify (Note 8)

555

2AA

555

SGA

X02

XX00

XX01

CFI Query (Note 9)

Program

555

2AA

555

Unlock Bypass

555

2AA

555

Unlock Bypass Program (Note 10)

XXX

Unlock Bypass Reset (Note 11)

XXX

Chip Erase

555

2AA

555

2AA

555

Sector Erase

555

2AA

555

2AA

Erase Suspend (Note 9)

XXX

Erase Resume (Note 10)

XXX

AM29F016D 数据表(PDF) 21 Page - Advanced Micro Devices

AM29F016D 数据表(HTML) 21 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

数据表下载

链接网址

AM29F016D 数据表(PDF) 21 Page - Advanced Micro Devices

AM29F016D 数据表(HTML) 21 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

数据表 下载

链接网址

数据表下载