AP9211

Document number: DS37596 Rev. 2 - 2

9 of 17

www.diodes.com

December 2015

© Diodes Incorporated

AP9211

7. Overvoltage Charger Detection Circuit

voltage (8.0V Typ.), the AP9211 will turn off charging MOSFET, when this voltage drops below overvoltage charger release voltage (7.3V Typ.), it

then turns on charging MOSFET. There are no delay times set for detection and release.

8. Power-Down Mode or Auto-Wake-Up Function Option

In device with power-down function, during power-down mode, device enters the overdischarge status. The IC enters sleep mode and the current

consumption becomes very low, typically 0.1µA. To release from power-down status to the normal status, charger connection is required.

In device with auto-wakeup mode, the IC remains active in the overdischarge state. The IC is released into the normal state by the operation that

increases the battery voltage more than overdischarge release voltage.