Regulatory compliance

SPWF01SA, SPWF01SC

10/16

DocID025635 Rev 6

Labeling instructions

When integrating the SPWF01SA and SPWF01SC into the final product, it must be ensured

that the FCC labeling requirements specified below are satisfied. Based on the Public

Notice from FCC, the product into which the ST transmitter module is installed must display

a label referring to the enclosed module. The label should use wording like the following:

Contains Transmitter Module

FCC ID: VRA-SG90112013

IC: 7420A-SG9011203

Any similar wording that expresses the same meaning may also be used.

CE

This module complies with the following European EMI/EMC and safety directives and

standards:

–

ETSI EN 300 328 V1.8.1:2012

–

EN 301 489-1 V1.9.2:2011 + EN 301 489-17 V2.2.1:2009

–

EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

–

EN 62479:2010

Figure 3. CE certified