13

36-00-01-00

5

Ver. 1.0.0

Aeroflex Microelectronics Solutions - HiRel

Notes:

Condition A up to the maximum TID level procured

1. AC Characteristics based on compliance with CLOCK input specifications

2. Supplied as a design guideline, not tested or guaranteed.

3. Period and Cycle to Cycle jitter is defined by JEDEC Standard 65B

25pF)(44.2ps/pF].

5. Guranteed by design.

6. Maximum Cycle Time is tested functionally.

SHUTDOWN AND SLEEP MODE CHARACTERISTICS (Pre and Post-Radiation)*

Notes:

Condition A up to the maximum TID level procured

1. The clock must start up prior to exiting sleep or shutdown modes. Parameter is guaranteed by design.

3. Tested functionally.

4. Guaranteed by design.

OE inactive to output three-state time

4.5

ns

OE active to output enable time

0

ns

PARAMETER

DESCRIPTION

CONDITION

MIN

MAX

UNIT

Device operation to SLEEP mode

ns

SLEEP high pulse width

100

μs

SLEEP low pulse width

100

μs

Device operation to SHUTDOWN

SHUTDOWN

ns

SLEEP recovery time

100 +

ns

50

us

Active to SLEEP current

100 +

ns

Active to SHUTDOWN current

SHUTDOWN

250

ns

Time to exit SLEEP current mode

0

ns

Time to exit SHUDOWN current

mode

0

ns

Clock recovery prior to exiting ZZ

20

μs

RESET low to high time

1

μs

SLEEP setup time prior to CLK

2.0

ns

SLEEP hold time after CLK

0.5

ns