Connection Diagrams

Functional Description

The FCT533 contains eight D-type latches with TRI-STATE

standard outputs. When the Latch Enable (LE) input is

HIGH, data on the D

dition the latches are transparent, i.e., a latch output will

change state each time its D input changes. When LE is

LOW, the latches store the information that was present on

the D inputs a setup time preceding the HIGH-to-LOW tran-

sition of LE. The TRI-STATE standard outputs are controlled

by the Output Enable (OE) input. When OE is LOW, the stan-

dard outputs are in the 2-state mode. When OE is HIGH, the

standard outputs are in the high impedance mode but this

does not interfere with entering new data into the latches.

Truth Table

Inputs

Outputs

LE

OE

D

n

O

n

XHX

Z

HL

L

H

HLH

L

LL

X

O

0

H = HIGH Voltage Level

L = LOW Voltage Level

Z = High Impedance

X = Immaterial

Logic Diagram

Pin Assignment

for DIP and Flatpak

DS100969-3

Pin Assignment

for LCC

DS100969-4

DS100969-5

Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.

www.national.com

2