Revision DS20160304

- 3 of 8 -

Disclaimer: Subject to change without notice

© 2016 RF Micro Devices, Inc.

www.rfmd.com / www.qorvo.com

RFPD3580

RFMD + TriQuint = Qorvo

Parameter

Specification

Unit

Condition

Min

Typ

Max

Distortion Data 40MHz to 550MHz. Test conditions unless otherwise noted:

V+ = 34V; TMB = 35°C; ZS = ZL = 75Ω

CTB

-80

-73

dBc

VO = 63 dBmV at 1218MHz, 22dB extrapolated tilt, 79 analog channels plus 111

digital channels (-6dB offset)[2][3]

XMOD

-75

-68

dBc

CSO

-80

-74

dBc

CIN

58

55

dB

1.

The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.

2.

79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +41 dBmV to +50.4 dBmV tilted output level, plus 111 digital channels, -

6dB offset relative to the equivalent analog carrier.

3.

Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by ANSI/SCTE 6. Composite Triple Beat

(CTB) - The CTB parameter is defined by ANSI/SCTE 6. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband

(selective voltmeter method), referenced to 100% modulation of the carrier being tested. Carrier to Intermodulation Noise (CIN) - The CIN

parameter is defined by ANSI/SCTE 17 (Test procedure for carrier to noise).