OUTPUT TIMING

The generated 1187.5Hz output clock (RDCL

line) is synchronized to the incoming data.

According to the internal PLL lock condition this

data change can results on the falling or on the

rising clock edge.

Whichever clock edge is used by the decoder (ris-

ing or falling edge) the data will remain valid for

416.7

µsec after the clock transition.

Figure 2: RDS timing diagram

Figure 3: Test Circuit

Measure

f1 (KHz)

f2 (KHz)

f3 (KHz)

∆Ph max

A

56.5

57

57.5

<5

°

B

565758

<7.5

°

C

55.5

57

58.5

<10

°

Note(2): The 3th harmonic (57KHz) must be less than -40dB in respect to the input signal 19KHz plus gain.

ELECTRICAL CHARACTERISTICS (continued)

TDA7330B

4/9