Table is for reference only. See individual Series' datasheets for specific screening.

NON

/ES

/883

pre-cap inspection, Method 2017, 2032

n

n

n

temperature Cycle (10 times)

Method 1010, Cond. C, -65°C to +150°C, ambient

n

Method 1010, Cond. B, -55°C to +125°C, ambient

n

Constant Acceleration

Method 2001, 3000 g

n

Method 2001, 500 g

n

piND, test Method 2020, Cond. A

96 hours

n

160 hours

n

Final electrical test, Mil-prF-38534, Group A,

Subgroups 1 through 6, -55°C, +25°C, +125°C case

n

Subgroups 1 and 4, +25°C case

n

n

Hermeticity test

n

n

n

n

Gross Leak, Dip

n

Final visual inspection, Method 2009

n

n

n

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

Notes

1. Standard and ES are non-QML products and may not meet all of the requirements of MIL-PRF-38534.

2. All processes are QML qualified and performed by certified operators.

3. Not required by DLA but performed to assure product quality.

4. Burn-in temperature designed to bring the case temperature to +125°C minimum. Burn-in is a powered

test.

Crane Aerospace & Electronics Power Solutions

FMSA/FMGA eMi input Filters

Page 14 of 14

28 VOlt iNput - 0.8 AMp

FMSA/FMGA Rev AA - 2015.12.15 This revision supersedes all previous releases. All technical information is believed to be accurate, but no

responsibility is assumed for errors or omissions. Interpoint is a registered trademark of Crane Co. FMSA Series and FMGA Series are trademarks

of Crane Electronics, Inc. Copyright © 1999 - 2016 Crane Electronics, Inc. All rights reserved. www.craneae.com/interpoint