11AA02UID datasheet(16/32 Pages) MICROCHIP

16 / 32 page

11AA02UID

DS20005206A-page 16

 2013 Microchip Technology Inc.

5.0

DATA PROTECTION

The following protection has been implemented to

prevent inadvertent writes to the array:

• The Write Enable Latch (WEL) is reset on power-

•A Write Enable (

WREN) instruction must be issued

to set the write enable latch

• After a write, ERAL, SETAL, or WRSR command,

the write enable latch is reset

• Commands to access the array or write to the

STATUS register are ignored during an internal

write cycle and programming is not affected

6.0

POWER-ON STATE

The 11AA02UID powers on in the following state:

• The device is in low-power Shutdown mode,

requiring a low-to-high transition on SCIO to enter

Idle mode

• The Write Enable Latch (WEL) is reset

• The internal Address Pointer is undefined

• A low-to-high transition, standby pulse and subse-

quent high-to-low transition on SCIO (the first low

pulse of the header) are required to enter the

active state

TABLE 6-1:

WRITE PROTECT FUNCTIONALITY MATRIX

WEL

Protected Blocks

Unprotected Blocks

Status Register

Protected

Writable

11AA02UID 数据表(PDF) 16 Page - Microchip Technology

11AA02UID 数据表(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

数据表下载