MDS 308 F

5

Revision 090704

ICS308

ICS VersaClock Software

ICS applies years of PLL optimization experience into a

user friendly software that accepts the user’s target

reference clock and output frequencies and generates

the lowest jitter, lowest power configuration, with only a

press of a button. The user does not need to have prior

PLL experience or determine the optimal VCO

frequency to support multiple output frequencies.

VersaClock software quickly evaluates accessible VCO

frequencies with available output divide values and

provides an easy to understand, bar code rating for the

target output frequencies. The user may evaluate

output accuracy, performance trade-off scenarios in

seconds.

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the ICS308. These ratings, which

are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the

device at these or any other conditions above those indicated in the operational sections of the

specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can

affect product reliability. Electrical parameters are guaranteed only over the recommended operating

temperature range.

Recommended Operation Conditions

Parameter

Item

Min.

Typ.

Max.

Units

Supply Voltage, VDD

Referenced to GND

7

V

Inputs

Referenced to GND

-0.5

VDD+ 0.5

V

Clock Outputs

Referenced to GND

-0.5

VDD+ 0.5

V

Storage Temperature

-65

150

°C

Soldering Temperature

Max 10 seconds

260

°C

Parameter

Min.

Typ.

Max.

Units

Ambient Operating Temperature (ICS308R)

0

+70

°C

Ambient Operating Temperature (ICS308RI)

-40

+85

°C

Power Supply Voltage (measured in respect to GND)

+3.0

+3.6

V

Power Supply Ramp Time

4

ms