STV7620M

10/17

8

ABSOLUTE MAXIMUM RATINGS

Note 1: Through one power output.

Note 2: Through one power output for all power outputs (see Figure 4) with junction temperature lower than or equal to

Tjmax

Note 3: These parameters are measured during ST’s internal qualification which includes temperature characterisation

on standard batches and on corners batches of the process. These parameters are not tested on the parts.

Note 4: Transient current. Spike current duration inferior to 300 ns.

Caution:

in accordance with the Absolute Maximum Rating System (IEC 60134), product quality may

suffer if the maximum rating is exceeded even momentarily for any parameter. That is, the absolute

maximum ratings are rated values at which the product is on the verge of suffering physical damage, and

therefore the product must be used under conditions that ensure that the absolute maximum rating are not

exceeded.

Symbol

Parameter

Value

Unit

Vcc

Logic supply range

-0.3, +7

V

Vpp

Driver supply range

-0.3, +95

V

Vin

Logic input voltage range

-0.3, Vcc+0.3

V

Ipout

Driver output current (Note 1)(Note 3) (Note 4)

- 40 /+30

mA

Diode Output Current (Note 2) (Note 3) (Note 4)

-200 /+300

mA

Tjmax

Maximum junction temperature

125

°C

Tstg

Storage temperature range

-50, +150

°C

Vout

Output power voltage range

-0.3, +90

V