LPS22HB datasheet(45/49 Pages) STMICROELECTRONICS

45 / 49 page

DocID027083 Rev 5

45/49

LPS22HB

9.17

STATUS (27h)

Status register

This register is updated every ODR cycle.

9.18

PRESS_OUT_XL (28h)

Pressure output value (LSB)

The pressure output value is a 24-bit data that contains the measured pressure. It is

composed of PRESS_OUT_H (2Ah), PRESS_OUT_L (29h) and PRESS_OUT_XL (28h).

The value is expressed as 2’s complement.

The output pressure register PRESS_OUT is provided as the difference between the

measured pressure and the content of the register RPDS (18h, 19h)*.

Please refer to Section 4.4: Interpreting pressure readings for additional info.

*DIFF_EN = '0', AUTOZERO = '0', AUTORIFP = '0'

76543210

T_OR

P_OR

T_DA

P_DA

T_OR

Temperature data overrun.

(0: no overrun has occurred;

1: a new data for temperature has overwritten the previous data)

P_OR

Pressure data overrun.

(0: no overrun has occurred;

1: new data for pressure has overwritten the previous data)

T_DA

Temperature data available.

(0: new data for temperature is not yet available;

1: a new temperature data is generated)

P_DA

Pressure data available.

(0: new data for pressure is not yet available;

1: a new pressure data is generated)

76543210

POUT7

POUT6

POUT5

POUT4

POUT3

POUT2

POUT1

POUT0

POUT[7:0]

This register contains the low part of the

pressure output value.

LPS22HB 数据表(PDF) 45 Page - STMicroelectronics

LPS22HB 数据表(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

数据表下载