| 数据搜索系统,热门电子元器件搜索 |
|
USB5734 数据表(PDF) 14 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB5734 数据表(HTML) 14 Page - Microchip Technology |
|
14 / 61 page ![]() USB5734 DS00001854D-page 14 2015-2016 Microchip Technology Inc. Note 3: Configuration strap values are latched on Power-On Reset (POR) and the rising edge of RESET_N (external chip reset). Configuration straps are identified by an underlined symbol name. Signals that function as con- figurations traps must be augmented with an external resistor when connected to a load. Refer to Section 3.4, "Configuration Straps and Programmable Functions" for additional information. Note 4: The PROG_FUNC2 buffer type is I/O6. The PROG_FUNC7 buffer type is I/O10. All other PROG_FUNCx pins have a buffer type of I/O12. Note 5: Configuration strap values are latched on Power-On Reset (POR) and the rising edge of RESET_N (external chip reset). Configuration straps are identified by an underlined symbol name. Signals that function as con- figurations traps must be augmented with an external resistor when connected to a load. Refer to Section 3.4, "Configuration Straps and Programmable Functions" for additional information. 1 SPI_DI IS SPI data input, when configured for SPI operation. GPIO9 I/O12 General purpose input/output 9. CFG_BC_EN I Battery Charging Configuration Strap. This configuration strap is used to enable battery charging. Refer to Section 3.4.4, "Battery Charging Configuration (CFG_BC_EN)" for more information. See Note 3. TABLE 3-7: PROGRAMMABLE FUNCTION PIN DESCRIPTIONS Num Pins Symbol Buffer Type Description 7 PROG_FUNC[7:1] Note 4 Programmable function pins 7-1. The functions of these pins are configured via the CFG_STRAP pin. Refer to Section 3.4.5, "Device Mode / PROG_FUNC[7:1] Configura- tion (CFG_STRAP)" for additional information. 1 CFG_STRAP I Device Mode Configuration Strap. This configuration strap is used to set the device mode. Refer to Sec- tion 3.4.5, "Device Mode / PROG_FUNC[7:1] Configuration (CFG_STRAP)" for more information. See Note 5. TABLE 3-6: SPI/UART PIN DESCRIPTIONS (CONTINUED) Num Pins Symbol Buffer Type Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |