Unless otherwise noted, V

in boldface type apply over the entire junction temperature range for operation, T

Symbol

Parameter

Conditions

Typical

Limit

Units

Min

Max

I

t

CLK-LP

CLK Low Period

(Note 7)

1.3

µs

t

CLK-HP

CLK High Period

(Note 7)

0.6

µs

t

SU

Set-Up Time Repeated

START Condition

(Note 7)

0.6

µs

t

DATA-HOLD

Data Hold Time

(Note 7)

300

ns

t

DATA-SU

Data Set-Up Time

(Note 7)

100

ns

t

SU

Set-Up Time for STOP

Condition

(Note 7)

0.6

µs

t

TRANS

Maximum Pulse Width of

Spikes that Must Be

Suppressed by the Input

Filter of Both DATA & CLK

Signals

(Note 7)

50

ns

Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which operation of the device

is guaranteed. Operating Ratings do not imply guaranteed performance limits. For guaranteed performance limits and associated test conditions, see the Electrical

Characteristics tables.

Note 2: All voltages are with respect to the potential at the GND pin.

Note 3: The Absolute Maximum power dissipation depends on the ambient temperature and can be calculated using the formula

(1)

be dissipated safely at ambient temperature below 85˚C. Less power can be dissipated safely at ambient temperatures above 85˚C. The Absolute Maximum power

dissipation can be increased by 27 mW for each degree below 85˚C, and it must be de-rated by 27 mW for each degree above 85˚C. For Operating Ratings

Note 4: The human-body model is 100 pF discharged through 1.5 k

Ω. The machine model is 0Ω in series with 220 pF.

guaranteed by correlating the electrical characteristics to process and temperature variations and applying statistical process control.

Note 6: Each LED pin should not exceed 25 mA and the package should not exceed a total of 200 mA.

Note 7: Guaranteed by design.

Typical Performance Characteristics

Frequency vs. Temp

(T

V

20085317

www.national.com

5