ADRF5020

Data Sheet

Rev. A | Page 6 of 12

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

GND

GND

RFC

GND

GND

GND

EN

VSS

CTRL

VDD

1

2

3

4

5

67

8

9

10

11

12

13

14

15

16

17

18

19

20

ADRF5020

TOP VIEW

(Not to Scale)

NOTES

1. THE EXPOSED PAD MUST BE CONNECTED

TO THE RF/DC GROUND OF THE PRINTED

CIRCUIT BOARD (PCB).

Figure 5. Pin Configuration (Top View)

Table 3. Pin Function Descriptions

Pin No.

Mnemonic

Description

1, 2, 4 to 7, 9, 10,

13, 16, 17, 19, 20

GND

Ground. These pins must be connected to the RF/dc ground of the printed circuit board (PCB).

3

RFC

RF Common Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is

necessary when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.

8

RF1

RF1 Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is necessary

when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.

11

VDD

Positive Supply Voltage.

12

CTRL

Control Input. See Figure 7 for the interface schematic.

14

EN

Enable Input. See Figure 7 for the interface schematic.

15

VSS

Negative Supply Voltage.

18

RF2

RF2 Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is necessary

when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.

EPAD

Exposed Pad. The exposed pad must be connected to the RF/dc ground of the PCB.

INTERFACE SCHEMATICS

RFC,

RF1,

RF2

Figure 6. RFC, RF1, and RF2 Pins Interface Schematic

CTRL, EN

VDD

VDD

Figure 7. Digital Pins (CTRL and EN) Interface Schematic