ZSC31015EIG1-R datasheet(51/52 Pages) IDT

51 / 52 page

November 14, 2016

ZSC31015 Datasheet

Document Revision History

Revision Date

Description

1.40

February 24, 2009

Revision to Byte 16 in Table 3.11.

Revision to add an explanation for default setting in Table 3.5.

Revision to “Lower Output Voltage Limit” specification in section 1.3.5.

Revisions in sections 2.4.3 and 2.5.1 to text regarding regulator set point and optimal

reference trim, including text about methods for preserving factory settings.

Revision to caption for Figure 3.2 to clarify that timing is typical.

Revision to text below Table 3.2 regarding minimum and maximum baud rate.

Added note below Table 3.3 clarifying that timing is typical.

Revisions to the default settings column and explanations for the Cust_ID0 and Cust_ID1

EEPROM words in Table 3.5.

Addition of section 5 to explain methods for restoration of EEPROM settings.

1.50

May 14, 2009

Revised conditions for “Overall Ratiometricity Error” and “Overall Accuracy – Analog”

specifications in section 1.3.9.

1.60

June 10, 2009

Added “Document Revision History” table.

1.70

March 29, 2010

Corrected start-up window time 1.5 to 3ms. This change applies only to rev C1 Silicon

(marked as ZSC31015Cxx.) and higher. Stop bit definition is replaced by stop time

definition. Relocated specs from Table 1.9 and deleted Table 1.9.

1.73

May 11, 2010

Added footnote to pages 2, 3, and 14 clarifying that the ZSC31015 is not AEC-Q100-

qualified.

1.74

July 19, 2010

Added special measurement information to Table 3.2; revised precondition for equation (1).

1.80

July 27, 2010

Revised product name from ZMD31015 to ZSC31015.

1.90

March 24, 2011

Added EEPROM specifications to section 1.3 “Electrical Parameters.” Added table 6.1

“Storage and Soldering Conditions” to section 6 “Pin Configuration and Package.” Updated

trim tolerances in sections 4.1and 4.2. Updated ZMDI contact information.

1.91

October 8, 2011

Revisions in section 1.3.4. Addition of part ordering numbers for all available temperature

ranges to section 11. Update for sales contact information

to add ZMDI’s Korea office.

Revision of product title.

1.92

January 12, 2012

Removed requirement of fastest update rate for analog output mode (applied to previous IC

revision). Updated contact information for the USA.

2.00

October 28, 2012

Updates to contact information and part ordering numbers.

2.10

October 9, 2013

Update to section 1.2 to add new minimum specification for output load capacitance.

Update to section 1.3.9 for tSTA maximum specification.

Updates to contact information and imagery for cover and headers.

Updates to part order options.

Updates to related documents.

2.11

December 11, 2013 Update for part ordering tables: kit no longer includes DVD of software. Software is now

downloaded from www.IDT.com/ZSC31015 to ensure user has the latest version of

software.

2.12

June 3, 2014

Update to section 1.2 regarding minimum bridge resistance values. Update to section 2.6.3

regarding minimum bridge resistance values.

Update for “Related Documents” section and ZMDI contact information.

April 22, 2016

Changed to IDT branding. Release date is now the revision number.

November 14, 2016 Correction of error in title regarding the product name.

ZSC31015EIG1-R 数据表(PDF) 51 Page - Integrated Device Technology

ZSC31015EIG1-R 数据表(HTML) 51 Page - Integrated Device Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表下载