CS10.241, CS10.241-S1

C-Line

The terminals are IP20 Finger safe constructed and suitable for field- and factory wiring.

CS10.241

CS10.241-S1

Type

Screw terminals

Quick-connect spring-clamp terminals

Solid wire

Stranded wire

American Wire Gauge

AWG20-10

AWG20-10

Max. wire diameter

2.8mm (including ferrules)

2.8mm (including ferrules)

Wire stripping length

7mm / 0.28inch

10mm / 0.4inch

Screwdriver

3.5mm slotted or cross-head No 2

not required

Recommended tightening torque

1Nm, 9lb.in

not applicable

Pull-out force

according to UL 486E

according to UL 486E

Instructions:

a)

Use appropriate copper cables that are designed for minimum operating temperatures of:

60°C for ambient up to 45°C and

75°C for ambient up to 60°C minimum

90°C for ambient up to 70°C minimum.

b)

Follow national installation codes and installation regulations!

c)

Ensure that all strands of a stranded wire enter the terminal connection!

d)

Do not use the unit without PE connection.

e)

Unused terminal compartments should be securely tightened.

f)

Ferrules are allowed.

Jul. 2015 / Rev. 2.0 DS-CS10.241-EN

All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

12/26