CS10.241, CS10.241-S1

C-Line

Output protection

Output over-voltage protection

typ. 35Vdc

max. 39Vdc

In case of an internal power supply defect, a redundant

circuit limits the maximum output voltage. The output

shuts down and automatically attempts to restart.

Degree of protection

IP 20

EN/IEC 60529

Caution: For use in a controlled environment according

to CSA 22.2 No 107.1-01.

Penetration protection

> 3.5mm

e.g. screws, small parts

Over-temperature protection

yes

Output shut-down with automatic restart

Input transient protection

MOV (Metal Oxide Varistor)

Internal input fuse

included

not user replaceable

*)

In case of a protection event, audible noise may occur.

SELV

IEC/EN 60950-1

PELV

IEC/EN 60204-1, EN 50178, IEC 62103, IEC 60364-4-41

double or reinforced insulation

Class of protection

I

PE (Protective Earth) connection required

Isolation resistance

> 5MOhm

input to output, 500Vdc

PE resistance

< 0.1Ohm

between housing and PE terminal

Touch current (leakage current)

typ. 0.36mA / 0.91mA

100Vac, 50Hz, TN-,TT-mains / IT-mains

typ. 0.50mA / 1.25mA

120Vac, 60Hz, TN-,TT-mains / IT-mains

typ. 0.64mA / 1.59mA

230Vac, 50Hz, TN-,TT-mains / IT-mains

max. 0.45mA / 1.13mA

110Vac, 50Hz, TN-,TT-mains / IT-mains

max. 0.62mA / 1.55mA

132Vac, 60Hz, TN-,TT-mains / IT-mains

max. 0.85mA / 2.11mA

264Vac, 50Hz, TN-,TT-mains / IT-mains

Jul. 2015 / Rev. 2.0 DS-CS10.241-EN

All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

16/26